Original: $1.41
-65%$1.41
$0.49The Story
The arris rail repair bracket galvanised 300mm (12") is a steel fixing bracket designed to reinforce split, cracked or sagging arris rails on featheredge fence panels, restoring structural integrity without replacing the entire rail or panel section.
Specifications
| Material | Steel |
|---|---|
| Treatment | Hot-dip galvanised |
| Finish | Galvanised |
| Length | 300mm (12") |
| Supplied | Single bracket |
What it's used for
- Repairing cracked or split arris rails on featheredge close-board fencing without full rail replacement
- Reinforcing sagging or weakened arris rails where the timber has deteriorated at the post fixing point
- Providing a secure mid-span repair on boundary and garden perimeter fencing
- General fence maintenance on domestic and trade sites where a quick, lasting fix is needed
Fitting and handling
Offered the bracket centrally over the damaged section of arris rail and fix through the pre-punched holes using suitable galvanised screws or nails to avoid rust staining on the timber face. Ensure the rail is held firm against the post before fixing to prevent movement once the bracket is in place. Because the bracket is already galvanised, no additional treatment is required, but store any unused brackets in a dry location to maintain the coating before installation.
FAQ
Will a 300mm arris rail repair bracket fit a standard arris rail?
Yes. The 300mm galvanised bracket is sized to sit over a standard triangular arris rail profile commonly used in featheredge close-board fencing across the UK. Always check your rail dimensions before ordering if you are working with an unusual profile.
Do I need to treat or paint the bracket after fitting?
No additional treatment is needed. The galvanised finish provides corrosion resistance suitable for outdoor use in the UK climate. If you are concerned about appearance against treated timber, a coat of fence paint over the bracket is harmless but not necessary for protection.
How many brackets do I need for a single arris rail repair?
In most cases one bracket is sufficient for a localised split or crack. For rails that have broken away from a post entirely, you may want to use two brackets, one on each side of the break, to restore full strength along the span.
Pick up your arris rail repair brackets alongside compatible timber at Nottage Timber Merchants. Browse our full range of fence rails for replacement arris and square rails to go alongside your repair. We offer next-day delivery to the Bridgend area and across South Wales on stocked items.
Description
The arris rail repair bracket galvanised 300mm (12") is a steel fixing bracket designed to reinforce split, cracked or sagging arris rails on featheredge fence panels, restoring structural integrity without replacing the entire rail or panel section.
Specifications
| Material | Steel |
|---|---|
| Treatment | Hot-dip galvanised |
| Finish | Galvanised |
| Length | 300mm (12") |
| Supplied | Single bracket |
What it's used for
- Repairing cracked or split arris rails on featheredge close-board fencing without full rail replacement
- Reinforcing sagging or weakened arris rails where the timber has deteriorated at the post fixing point
- Providing a secure mid-span repair on boundary and garden perimeter fencing
- General fence maintenance on domestic and trade sites where a quick, lasting fix is needed
Fitting and handling
Offered the bracket centrally over the damaged section of arris rail and fix through the pre-punched holes using suitable galvanised screws or nails to avoid rust staining on the timber face. Ensure the rail is held firm against the post before fixing to prevent movement once the bracket is in place. Because the bracket is already galvanised, no additional treatment is required, but store any unused brackets in a dry location to maintain the coating before installation.
FAQ
Will a 300mm arris rail repair bracket fit a standard arris rail?
Yes. The 300mm galvanised bracket is sized to sit over a standard triangular arris rail profile commonly used in featheredge close-board fencing across the UK. Always check your rail dimensions before ordering if you are working with an unusual profile.
Do I need to treat or paint the bracket after fitting?
No additional treatment is needed. The galvanised finish provides corrosion resistance suitable for outdoor use in the UK climate. If you are concerned about appearance against treated timber, a coat of fence paint over the bracket is harmless but not necessary for protection.
How many brackets do I need for a single arris rail repair?
In most cases one bracket is sufficient for a localised split or crack. For rails that have broken away from a post entirely, you may want to use two brackets, one on each side of the break, to restore full strength along the span.
Pick up your arris rail repair brackets alongside compatible timber at Nottage Timber Merchants. Browse our full range of fence rails for replacement arris and square rails to go alongside your repair. We offer next-day delivery to the Bridgend area and across South Wales on stocked items.
