Original: $105.74
-65%$105.74
$37.01The Story
The Hutton Picket Pale Gate is a pressure-treated softwood garden gate designed to pair with Hutton Picket Fence Panels. Available in 900mm x 900mm and 900mm x 1200mm sizes, it is smooth planed, hand-finished, and built from oversized timber sections for lasting strength at garden entrances and pathways.
Specifications
| Property | Detail |
|---|---|
| Material | Softwood |
| Treatment | Next Generation TANALITH E pressure treatment |
| Finish | Smooth planed and hand-finished |
| Nominal Sizes | 900 x 900mm, 900 x 1200mm |
| Thickness | Just over 20mm |
| Performance Warranty | 15 years against rot and insect attack (terms apply) |
| Sourcing | Sustainably sourced, manufactured in Gloucestershire |
What it is used for
- Garden entrance gates where a traditional picket style is required
- Side access gates alongside a matching Hutton Picket Fence run
- Pathway entrances between garden sections or borders
- Front garden gates where a low-to-mid height boundary is needed
Fitting and handling
Store the gate flat and off the ground before installation, allowing it to acclimatise to site conditions for at least 48 hours, particularly in wet weather. Hang using galvanised or stainless steel hinges to avoid rust staining the treated timber, and fit a suitable gate catch or latch to keep the gate secure. Although the TANALITH E treatment provides long-term protection, applying a compatible exterior timber finish after installation will help maintain appearance and extend service life further.
FAQ
Does the Hutton Picket Pale Gate match Hutton Picket Fence Panels?
Yes, the gate is specifically designed to complement Hutton Picket Fence Panels, sharing the same picket profile, planed finish, and TANALITH E treatment so the two products sit together consistently along a fence run.
What is the difference between the 900 x 900mm and 900 x 1200mm options?
Both gates are 900mm high. The 900mm wide version suits a standard single pedestrian opening, while the 1200mm wide version gives a broader opening suitable for wheelbarrows, bikes, or wider access points. Both are priced at £78.00.
Do I need to treat the gate before fitting it?
The gate arrives pressure treated with TANALITH E and carries a 15-year rot and insect warranty, so additional preservative treatment is not required before installation. Applying an exterior wood stain or paint is optional but recommended to enhance weather resistance and maintain appearance over time.
Order your Hutton Picket Pale Gate from Nottage Timber Merchants in Bridgend, with next-day delivery available across South Wales. For posts and rails to complete your fence run, browse our fence posts collection.
Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.
Description
The Hutton Picket Pale Gate is a pressure-treated softwood garden gate designed to pair with Hutton Picket Fence Panels. Available in 900mm x 900mm and 900mm x 1200mm sizes, it is smooth planed, hand-finished, and built from oversized timber sections for lasting strength at garden entrances and pathways.
Specifications
| Property | Detail |
|---|---|
| Material | Softwood |
| Treatment | Next Generation TANALITH E pressure treatment |
| Finish | Smooth planed and hand-finished |
| Nominal Sizes | 900 x 900mm, 900 x 1200mm |
| Thickness | Just over 20mm |
| Performance Warranty | 15 years against rot and insect attack (terms apply) |
| Sourcing | Sustainably sourced, manufactured in Gloucestershire |
What it is used for
- Garden entrance gates where a traditional picket style is required
- Side access gates alongside a matching Hutton Picket Fence run
- Pathway entrances between garden sections or borders
- Front garden gates where a low-to-mid height boundary is needed
Fitting and handling
Store the gate flat and off the ground before installation, allowing it to acclimatise to site conditions for at least 48 hours, particularly in wet weather. Hang using galvanised or stainless steel hinges to avoid rust staining the treated timber, and fit a suitable gate catch or latch to keep the gate secure. Although the TANALITH E treatment provides long-term protection, applying a compatible exterior timber finish after installation will help maintain appearance and extend service life further.
FAQ
Does the Hutton Picket Pale Gate match Hutton Picket Fence Panels?
Yes, the gate is specifically designed to complement Hutton Picket Fence Panels, sharing the same picket profile, planed finish, and TANALITH E treatment so the two products sit together consistently along a fence run.
What is the difference between the 900 x 900mm and 900 x 1200mm options?
Both gates are 900mm high. The 900mm wide version suits a standard single pedestrian opening, while the 1200mm wide version gives a broader opening suitable for wheelbarrows, bikes, or wider access points. Both are priced at £78.00.
Do I need to treat the gate before fitting it?
The gate arrives pressure treated with TANALITH E and carries a 15-year rot and insect warranty, so additional preservative treatment is not required before installation. Applying an exterior wood stain or paint is optional but recommended to enhance weather resistance and maintain appearance over time.
Order your Hutton Picket Pale Gate from Nottage Timber Merchants in Bridgend, with next-day delivery available across South Wales. For posts and rails to complete your fence run, browse our fence posts collection.
