Original: $54.01
-65%$54.01
$18.90The Story
A preformed bullnose riser with a pine face, this 1030mm stair component delivers a clean, accurate curved profile at the base of a staircase riser without any on-site shaping. The external radius is 95mm with a 220mm return, making it straightforward to fit on new stairs or renovation projects.
Specifications
| Material | Pine faced (preformed) |
|---|---|
| Profile | Bullnose riser |
| Length | 1030mm |
| External Radius | 95mm |
| Return | 220mm |
| Finish | Ready to paint, stain, or varnish |
| Application | Stair cladding component, treads and risers |
What it's used for
- Forming the curved bottom riser on a traditional or contemporary staircase, where a neat bullnose profile is required without hand-shaping on site.
- Staircase renovation and re-cladding projects, replacing worn or damaged risers while retaining a consistent pine finish throughout.
- Matching to existing pine stair treads and stringer boards where continuity of timber species and profile is important.
- New staircase installations by professional joiners or competent DIY fitters working to standard UK domestic stair geometry.
Fitting and handling
Allow the riser to acclimatise in the room where it will be fitted for at least 48 hours before fixing, particularly in centrally heated homes, to minimise any movement after installation. Fix using a suitable timber adhesive in combination with lost-head nails or screws driven from behind the riser where possible, ensuring the curved face remains clean and undamaged. Once fitted, prime all surfaces, including any cut ends, before applying your chosen paint, stain, or varnish to achieve a durable and uniform finish.
FAQ
Will this bullnose riser fit a standard UK staircase?
The 1030mm length suits the majority of standard UK domestic staircases. Check your stair width before ordering, and note that the riser can be trimmed carefully on site if a shorter length is needed, though the curved profile itself cannot be altered without specialist tooling.
Can I paint or stain this riser to match my existing staircase?
Yes. The pine face accepts paint, wood stain, and varnish readily. Sand lightly with 120-grit paper before applying a primer or base coat, and always seal cut ends to prevent moisture ingress and movement.
Is this riser suitable for a staircase renovation as well as new build?
Yes, it works equally well for renovation and new installation. When retrofitting, remove the old riser fully and check the substrate is flat and secure before bonding and fixing the new preformed piece into position.
Browse the full range of pine mouldings and stair components at Nottage Timber Merchants. We supply trade and retail customers across South Wales, with next-day delivery available to the Bridgend area and beyond. Call us for stock availability or project advice.
Description
A preformed bullnose riser with a pine face, this 1030mm stair component delivers a clean, accurate curved profile at the base of a staircase riser without any on-site shaping. The external radius is 95mm with a 220mm return, making it straightforward to fit on new stairs or renovation projects.
Specifications
| Material | Pine faced (preformed) |
|---|---|
| Profile | Bullnose riser |
| Length | 1030mm |
| External Radius | 95mm |
| Return | 220mm |
| Finish | Ready to paint, stain, or varnish |
| Application | Stair cladding component, treads and risers |
What it's used for
- Forming the curved bottom riser on a traditional or contemporary staircase, where a neat bullnose profile is required without hand-shaping on site.
- Staircase renovation and re-cladding projects, replacing worn or damaged risers while retaining a consistent pine finish throughout.
- Matching to existing pine stair treads and stringer boards where continuity of timber species and profile is important.
- New staircase installations by professional joiners or competent DIY fitters working to standard UK domestic stair geometry.
Fitting and handling
Allow the riser to acclimatise in the room where it will be fitted for at least 48 hours before fixing, particularly in centrally heated homes, to minimise any movement after installation. Fix using a suitable timber adhesive in combination with lost-head nails or screws driven from behind the riser where possible, ensuring the curved face remains clean and undamaged. Once fitted, prime all surfaces, including any cut ends, before applying your chosen paint, stain, or varnish to achieve a durable and uniform finish.
FAQ
Will this bullnose riser fit a standard UK staircase?
The 1030mm length suits the majority of standard UK domestic staircases. Check your stair width before ordering, and note that the riser can be trimmed carefully on site if a shorter length is needed, though the curved profile itself cannot be altered without specialist tooling.
Can I paint or stain this riser to match my existing staircase?
Yes. The pine face accepts paint, wood stain, and varnish readily. Sand lightly with 120-grit paper before applying a primer or base coat, and always seal cut ends to prevent moisture ingress and movement.
Is this riser suitable for a staircase renovation as well as new build?
Yes, it works equally well for renovation and new installation. When retrofitting, remove the old riser fully and check the substrate is flat and secure before bonding and fixing the new preformed piece into position.
Browse the full range of pine mouldings and stair components at Nottage Timber Merchants. We supply trade and retail customers across South Wales, with next-day delivery available to the Bridgend area and beyond. Call us for stock availability or project advice.
