Original: $6.85
-65%$6.85
$2.40The Story
Stop chamfer primed spindles at 41mm x 41mm and 900mm in length are a straightforward choice for domestic stair balustrade systems. White primed and ready to paint, these traditional-profile spindles suit both classic and contemporary staircases across a range of standard installations.
Specifications
| Material | Pine (softwood) |
|---|---|
| Finish | White primed |
| Nominal Size | 41mm x 41mm x 900mm |
| Profile | Stop chamfer |
| Length | 900mm |
| Use | Interior stair balustrade |
What it's used for
- Filling the balustrade panels on straight-flight domestic staircases between base rail and handrail
- Replacing damaged or missing spindles in an existing stair balustrade where a 41mm fitting is standard
- New-build and renovation staircase projects requiring a consistent, traditional-profile square spindle
- Matching to stop chamfer newel posts and handrail profiles for a co-ordinated staircase appearance
Fitting and handling
Store spindles flat in a dry indoor space for at least 48 hours before fitting to allow the timber to acclimatise to the temperature and humidity of the building. Fix into the base rail and underside of the handrail using wood adhesive, dowels, or approved staircase spindle adhesive in line with the manufacturer's guidance for your balustrade system. The white primed finish is ready to accept gloss or satinwood paint straight away, though a light sand between coats will give a cleaner finish on site.
FAQ
What is the difference between a stop chamfer and a plain square spindle?
A stop chamfer spindle has angled flat cuts that run partway along each face and stop before the end sections, leaving square top and bottom sections for fixing. A plain square spindle has no profile detail. The stop chamfer is a widely used traditional profile that adds visual interest without a heavily decorative appearance.
Will a 900mm spindle suit my staircase, and do I need to cut it to length?
900mm is the most common spindle length for domestic stairs in the UK, but the exact cut length will depend on your specific staircase geometry, handrail height, and base rail depth. Most fitters trim spindles to the required length on site. Always measure your existing installation or consult your staircase manufacturer's specifications before ordering.
Is the primed finish suitable for painting straight away?
Yes. The white primer acts as a base coat and accepts most interior wood paints without additional priming. For the best result, lightly sand the surface before applying your topcoat and apply two finish coats for full opacity and durability.
Browse the full range of stair components at Nottage Timber Merchants, including newel posts, base rails, and handrails, in our newel posts collection. We supply trade and retail customers across Bridgend and South Wales, with competitive pricing and reliable stock available for collection or local delivery.
Description
Stop chamfer primed spindles at 41mm x 41mm and 900mm in length are a straightforward choice for domestic stair balustrade systems. White primed and ready to paint, these traditional-profile spindles suit both classic and contemporary staircases across a range of standard installations.
Specifications
| Material | Pine (softwood) |
|---|---|
| Finish | White primed |
| Nominal Size | 41mm x 41mm x 900mm |
| Profile | Stop chamfer |
| Length | 900mm |
| Use | Interior stair balustrade |
What it's used for
- Filling the balustrade panels on straight-flight domestic staircases between base rail and handrail
- Replacing damaged or missing spindles in an existing stair balustrade where a 41mm fitting is standard
- New-build and renovation staircase projects requiring a consistent, traditional-profile square spindle
- Matching to stop chamfer newel posts and handrail profiles for a co-ordinated staircase appearance
Fitting and handling
Store spindles flat in a dry indoor space for at least 48 hours before fitting to allow the timber to acclimatise to the temperature and humidity of the building. Fix into the base rail and underside of the handrail using wood adhesive, dowels, or approved staircase spindle adhesive in line with the manufacturer's guidance for your balustrade system. The white primed finish is ready to accept gloss or satinwood paint straight away, though a light sand between coats will give a cleaner finish on site.
FAQ
What is the difference between a stop chamfer and a plain square spindle?
A stop chamfer spindle has angled flat cuts that run partway along each face and stop before the end sections, leaving square top and bottom sections for fixing. A plain square spindle has no profile detail. The stop chamfer is a widely used traditional profile that adds visual interest without a heavily decorative appearance.
Will a 900mm spindle suit my staircase, and do I need to cut it to length?
900mm is the most common spindle length for domestic stairs in the UK, but the exact cut length will depend on your specific staircase geometry, handrail height, and base rail depth. Most fitters trim spindles to the required length on site. Always measure your existing installation or consult your staircase manufacturer's specifications before ordering.
Is the primed finish suitable for painting straight away?
Yes. The white primer acts as a base coat and accepts most interior wood paints without additional priming. For the best result, lightly sand the surface before applying your topcoat and apply two finish coats for full opacity and durability.
Browse the full range of stair components at Nottage Timber Merchants, including newel posts, base rails, and handrails, in our newel posts collection. We supply trade and retail customers across Bridgend and South Wales, with competitive pricing and reliable stock available for collection or local delivery.
