The Story
Straight brace gallows brackets in solid timber are designed to support overhanging structures such as porches, canopies and balconies. Available in two sizes, medium 650mm x 600mm and large 700mm x 700mm, they combine reliable load-bearing capability with a traditional profile that suits both period and contemporary properties.
Specifications
| Property | Detail |
|---|---|
| Material | Solid timber |
| Profile | Straight brace gallows bracket |
| Nominal Size (Medium) | 650mm x 600mm |
| Nominal Size (Large) | 700mm x 700mm |
| Finish | Sawn / ready for treatment or paint |
What it's used for
- Supporting porch canopies and entrance hoods on residential and commercial buildings
- Providing structural bracing for balcony overhangs and projecting fascias
- Adding decorative and structural support to garden pergolas and outdoor covered structures
- Restoration work on period properties where a traditional timber bracket profile is required
Fitting and handling
Before installation, allow the brackets to acclimatise in a dry, ventilated space for at least 48 hours, particularly if moving from cold outdoor storage into a heated environment. Fix using suitable structural screws or coach bolts through pre-drilled holes into sound, load-bearing timber or masonry, following current UK building regulations for the load being supported. Apply an exterior-grade preservative, paint or stain to all faces and end grain before and after installation to protect against moisture ingress and extend service life.
FAQ
What size gallows bracket do I need for a standard porch canopy?
For most domestic porch canopies with a modest overhang, the medium 650mm x 600mm bracket is sufficient. If the canopy projection exceeds around 600mm or the roof carries additional load such as tiles rather than felt, the large 700mm x 700mm bracket provides extra support. If in doubt, consult a structural engineer before specifying.
Do these gallows brackets come pre-treated or pre-finished?
The brackets are supplied sawn and ready for your chosen finish. We recommend applying a quality exterior timber preservative or paint system to all surfaces, including end grain, before fitting. This protects against rot and weathering and is especially important in the exposed conditions typical across South Wales.
Can these be used for a garden pergola or outdoor structure?
Yes. The straight brace profile works well as a decorative and structural support in pergolas, covered walkways and similar garden structures. Ensure fixings are suitable for outdoor use and that end grain is sealed thoroughly, as this is the area most vulnerable to moisture absorption.
Browse our oak mouldings collection for complementary architectural timber profiles. Nottage Timber Merchants supply trade and retail customers across Bridgend and South Wales, with next-day delivery available to many local postcodes.
Description
Straight brace gallows brackets in solid timber are designed to support overhanging structures such as porches, canopies and balconies. Available in two sizes, medium 650mm x 600mm and large 700mm x 700mm, they combine reliable load-bearing capability with a traditional profile that suits both period and contemporary properties.
Specifications
| Property | Detail |
|---|---|
| Material | Solid timber |
| Profile | Straight brace gallows bracket |
| Nominal Size (Medium) | 650mm x 600mm |
| Nominal Size (Large) | 700mm x 700mm |
| Finish | Sawn / ready for treatment or paint |
What it's used for
- Supporting porch canopies and entrance hoods on residential and commercial buildings
- Providing structural bracing for balcony overhangs and projecting fascias
- Adding decorative and structural support to garden pergolas and outdoor covered structures
- Restoration work on period properties where a traditional timber bracket profile is required
Fitting and handling
Before installation, allow the brackets to acclimatise in a dry, ventilated space for at least 48 hours, particularly if moving from cold outdoor storage into a heated environment. Fix using suitable structural screws or coach bolts through pre-drilled holes into sound, load-bearing timber or masonry, following current UK building regulations for the load being supported. Apply an exterior-grade preservative, paint or stain to all faces and end grain before and after installation to protect against moisture ingress and extend service life.
FAQ
What size gallows bracket do I need for a standard porch canopy?
For most domestic porch canopies with a modest overhang, the medium 650mm x 600mm bracket is sufficient. If the canopy projection exceeds around 600mm or the roof carries additional load such as tiles rather than felt, the large 700mm x 700mm bracket provides extra support. If in doubt, consult a structural engineer before specifying.
Do these gallows brackets come pre-treated or pre-finished?
The brackets are supplied sawn and ready for your chosen finish. We recommend applying a quality exterior timber preservative or paint system to all surfaces, including end grain, before fitting. This protects against rot and weathering and is especially important in the exposed conditions typical across South Wales.
Can these be used for a garden pergola or outdoor structure?
Yes. The straight brace profile works well as a decorative and structural support in pergolas, covered walkways and similar garden structures. Ensure fixings are suitable for outdoor use and that end grain is sealed thoroughly, as this is the area most vulnerable to moisture absorption.
Browse our oak mouldings collection for complementary architectural timber profiles. Nottage Timber Merchants supply trade and retail customers across Bridgend and South Wales, with next-day delivery available to many local postcodes.