Original: $65.69
-65%$65.69
$22.99The Story
A white primed door frame lining kit with removable door stop, designed for accurate internal door reveals in new builds and refurbishments. Available in 108mm and 133mm widths, with both standard and fire-rated options, these Deanta kits are ready to paint straight from the box.
Specifications
| Material | High-density particleboard core |
| Finish | White primed, ready to paint |
| Nominal Size | 108mm x 30mm or 133mm x 30mm |
| Profile | Flat lining with removable door stop |
| Fire Rating | Non-fire rated or fire rated (supplied with LP1504 intumescent seal) |
| Use | Internal only |
What it's used for
- Lining internal door openings in new build properties where a clean, painted finish is required from the outset
- Replacing tired or damaged door frames during renovation and refurbishment work
- Fire door installations where an FD30 or compatible door set requires a fire-rated lining with intumescent seal
- Upgrade projects where the removable stop allows the door to be hung first and the stop fitted to suit exact margins
Fitting and handling
Allow the lining kit to acclimatise in the room where it will be fitted for at least 48 hours before installation, keeping it stored flat and away from damp or direct heat sources. Fix through the face of the lining into the surrounding structure using appropriate screws and cover with filler before applying your finish coat. Where the fire-rated option is used, ensure the intumescent seal is correctly seated and that the door leaf specified is compatible with the lining for the installation to meet Building Regulations.
FAQ
What is the difference between the 108mm and 133mm lining kits?
The width refers to the depth of the lining, which needs to match the thickness of the wall including plaster. The 108mm kit suits standard stud partition walls, while the 133mm kit is better suited to thicker masonry or blockwork walls with a heavier plaster finish. Measure your finished wall thickness before ordering.
Can I use the fire-rated lining kit with any fire door?
No. The fire-rated lining is supplied with an LP1504 intumescent seal and must be used as part of a compatible fire door installation. The door leaf, hinges, and any hardware must all be specified for use together to meet FD30 requirements under Building Regulations Approved Document B.
Why does this lining kit have a removable door stop?
A removable stop allows you to hang the door leaf onto the lining first, then fit the stop tight to the face of the door afterwards. This gives you much tighter control over the gap between the door and the stop, resulting in a neater finish compared to fixed-stop linings.
Browse the full range of internal door linings and frames at Nottage Timber Merchants at door linings and frames. We supply trade and retail customers across Bridgend and South Wales, with next-day delivery available to many local areas.
Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.
Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.
Description
A white primed door frame lining kit with removable door stop, designed for accurate internal door reveals in new builds and refurbishments. Available in 108mm and 133mm widths, with both standard and fire-rated options, these Deanta kits are ready to paint straight from the box.
Specifications
| Material | High-density particleboard core |
| Finish | White primed, ready to paint |
| Nominal Size | 108mm x 30mm or 133mm x 30mm |
| Profile | Flat lining with removable door stop |
| Fire Rating | Non-fire rated or fire rated (supplied with LP1504 intumescent seal) |
| Use | Internal only |
What it's used for
- Lining internal door openings in new build properties where a clean, painted finish is required from the outset
- Replacing tired or damaged door frames during renovation and refurbishment work
- Fire door installations where an FD30 or compatible door set requires a fire-rated lining with intumescent seal
- Upgrade projects where the removable stop allows the door to be hung first and the stop fitted to suit exact margins
Fitting and handling
Allow the lining kit to acclimatise in the room where it will be fitted for at least 48 hours before installation, keeping it stored flat and away from damp or direct heat sources. Fix through the face of the lining into the surrounding structure using appropriate screws and cover with filler before applying your finish coat. Where the fire-rated option is used, ensure the intumescent seal is correctly seated and that the door leaf specified is compatible with the lining for the installation to meet Building Regulations.
FAQ
What is the difference between the 108mm and 133mm lining kits?
The width refers to the depth of the lining, which needs to match the thickness of the wall including plaster. The 108mm kit suits standard stud partition walls, while the 133mm kit is better suited to thicker masonry or blockwork walls with a heavier plaster finish. Measure your finished wall thickness before ordering.
Can I use the fire-rated lining kit with any fire door?
No. The fire-rated lining is supplied with an LP1504 intumescent seal and must be used as part of a compatible fire door installation. The door leaf, hinges, and any hardware must all be specified for use together to meet FD30 requirements under Building Regulations Approved Document B.
Why does this lining kit have a removable door stop?
A removable stop allows you to hang the door leaf onto the lining first, then fit the stop tight to the face of the door afterwards. This gives you much tighter control over the gap between the door and the stop, resulting in a neater finish compared to fixed-stop linings.
Browse the full range of internal door linings and frames at Nottage Timber Merchants at door linings and frames. We supply trade and retail customers across Bridgend and South Wales, with next-day delivery available to many local areas.
