The Story
This 5 bar field gate, UC3 green treated and 3000mm wide, is built for agricultural and rural use where a reliable, rot-resistant gate is needed at a standard farm or field opening. Constructed from fencing grade timber, it offers straightforward, practical performance in exposed outdoor conditions.
Specifications
| Property | Detail |
|---|---|
| Material | Softwood timber |
| Treatment | UC3 pressure treated, green |
| Grade | Fencing grade |
| Finish | Rough sawn / not fully planed |
| Nominal Width | 3000mm (approx. 10ft) |
| Use Class | UC3 - above ground, exposed |
| Bar Configuration | 5 bar |
What it's used for
- Field and farm access points where a 10ft opening needs a sturdy, weather-resistant gate
- Livestock enclosures including paddocks, sheep fields, and cattle pastures
- Agricultural yard entrances and rural property boundaries
- Smallholdings and equestrian properties requiring a practical, no-frills gate solution
Fitting and handling
Before fitting, store the gate flat and off the ground on level bearers in a covered or sheltered area to prevent warping prior to installation. Hang using heavy-duty hook and band hinges rated for the gate weight, fixed into a substantial timber or concrete post - a 125mm or larger post is recommended for a gate of this width. No additional preservative treatment is required on sawn ends as the UC3 pressure treatment penetrates throughout, but a brush application of compatible end-grain preservative on any cut surfaces after trimming is good practice.
FAQ
What does UC3 treatment mean on a field gate?
UC3 refers to Use Class 3 under the European hazard class system for timber preservation. It means the timber has been treated to resist rot, fungal decay, and insect attack in above-ground situations where it is exposed to the weather, such as an outdoor gate in a field or farm setting.
Is a 3000mm field gate the same as a 10ft gate?
Yes, 3000mm is approximately 10 feet, which is one of the most common standard widths for agricultural field gates in the UK. It suits typical tractor access and general farm vehicle openings without requiring a bespoke or oversized fitting.
Does the gate come with hinges and fittings?
This gate is supplied as a bare gate only, without hinges, latches, or hanging hardware. You will need to source suitable hook and band hinges and a gate latch separately. Nottage Timber Merchants stock a range of ironmongery suitable for field gates.
For gate hardware and fixings to complete your installation, browse our ironmongery collection. Nottage Timber Merchants offer delivery across South Wales, including next-day options to the Bridgend area - contact us directly for bulk or trade pricing on multiple gates.
Description
This 5 bar field gate, UC3 green treated and 3000mm wide, is built for agricultural and rural use where a reliable, rot-resistant gate is needed at a standard farm or field opening. Constructed from fencing grade timber, it offers straightforward, practical performance in exposed outdoor conditions.
Specifications
| Property | Detail |
|---|---|
| Material | Softwood timber |
| Treatment | UC3 pressure treated, green |
| Grade | Fencing grade |
| Finish | Rough sawn / not fully planed |
| Nominal Width | 3000mm (approx. 10ft) |
| Use Class | UC3 - above ground, exposed |
| Bar Configuration | 5 bar |
What it's used for
- Field and farm access points where a 10ft opening needs a sturdy, weather-resistant gate
- Livestock enclosures including paddocks, sheep fields, and cattle pastures
- Agricultural yard entrances and rural property boundaries
- Smallholdings and equestrian properties requiring a practical, no-frills gate solution
Fitting and handling
Before fitting, store the gate flat and off the ground on level bearers in a covered or sheltered area to prevent warping prior to installation. Hang using heavy-duty hook and band hinges rated for the gate weight, fixed into a substantial timber or concrete post - a 125mm or larger post is recommended for a gate of this width. No additional preservative treatment is required on sawn ends as the UC3 pressure treatment penetrates throughout, but a brush application of compatible end-grain preservative on any cut surfaces after trimming is good practice.
FAQ
What does UC3 treatment mean on a field gate?
UC3 refers to Use Class 3 under the European hazard class system for timber preservation. It means the timber has been treated to resist rot, fungal decay, and insect attack in above-ground situations where it is exposed to the weather, such as an outdoor gate in a field or farm setting.
Is a 3000mm field gate the same as a 10ft gate?
Yes, 3000mm is approximately 10 feet, which is one of the most common standard widths for agricultural field gates in the UK. It suits typical tractor access and general farm vehicle openings without requiring a bespoke or oversized fitting.
Does the gate come with hinges and fittings?
This gate is supplied as a bare gate only, without hinges, latches, or hanging hardware. You will need to source suitable hook and band hinges and a gate latch separately. Nottage Timber Merchants stock a range of ironmongery suitable for field gates.
For gate hardware and fixings to complete your installation, browse our ironmongery collection. Nottage Timber Merchants offer delivery across South Wales, including next-day options to the Bridgend area - contact us directly for bulk or trade pricing on multiple gates.
