The Story
This UC3 green treated 5 bar field gate at 1200mm wide is designed for agricultural and rural use, providing a sturdy, rot-resistant barrier for farm entrances, paddocks, and field boundaries. Pressure treated to Use Class 3 specification, it performs reliably in exposed above-ground outdoor conditions.
Specifications
| Property | Detail |
|---|---|
| Material | Softwood timber |
| Treatment | UC3 green preservative pressure treatment |
| Grade | Fencing grade |
| Finish | Rough sawn / not guaranteed fully planed |
| Nominal Width | 1200mm |
| Bar Count | 5 bar |
| Use Class | UC3 - above ground, exposed exterior |
What it's used for
- Farm and agricultural field entrances where a lightweight single gate is sufficient
- Paddock and livestock enclosure access points on smallholdings and rural properties
- Garden boundary gates in rural settings where a traditional field gate style suits the surroundings
- Allotment and orchard access where a functional, hardwearing gate is needed without decorative finish
Fitting and handling
Before hanging, store the gate flat and off the ground in a covered, ventilated space to allow it to acclimatise to site conditions and reduce the risk of warping. Fix using heavy-duty hook and band hinges into a solid timber or concrete post, ensuring the hanging post is set at least 600mm into the ground and well braced. No additional painting or staining is required given the UC3 treatment, though a coat of exterior wood preservative will extend the service life further if the gate is in a particularly exposed position.
FAQ
What does UC3 treatment mean for a field gate?
UC3, or Use Class 3, means the timber has been pressure treated with preservative to resist decay and fungal attack in above-ground exterior conditions where it is exposed to rain and moisture. It is suitable for outdoor use but is not intended for direct ground contact, which falls under UC4.
Is a 1200mm field gate wide enough for livestock?
A 1200mm gate is generally suitable for pedestrian access, small livestock such as sheep, and smaller machinery access paths. For cattle, horses, or tractor access you would typically need a wider gate of 2400mm or more. This width suits paddock corners, smaller enclosures, and pedestrian field access points.
Will this gate need treating again after fitting?
The UC3 pressure treatment provides lasting protection without the need for immediate re-treatment. However, applying an exterior wood preservative or oil every couple of years, particularly to cut ends or any drilled fixings, will help maintain the gate and extend its working life in harsh or coastal conditions.
Nottage Timber Merchants supply field gates and fencing materials to trade and retail customers across South Wales from our yard in Bridgend. For posts, rails, and boards to complete your fencing project, browse our fence posts collection. Local customers in the Bridgend area can collect same day, and next-day delivery options are available across South Wales.
Description
This UC3 green treated 5 bar field gate at 1200mm wide is designed for agricultural and rural use, providing a sturdy, rot-resistant barrier for farm entrances, paddocks, and field boundaries. Pressure treated to Use Class 3 specification, it performs reliably in exposed above-ground outdoor conditions.
Specifications
| Property | Detail |
|---|---|
| Material | Softwood timber |
| Treatment | UC3 green preservative pressure treatment |
| Grade | Fencing grade |
| Finish | Rough sawn / not guaranteed fully planed |
| Nominal Width | 1200mm |
| Bar Count | 5 bar |
| Use Class | UC3 - above ground, exposed exterior |
What it's used for
- Farm and agricultural field entrances where a lightweight single gate is sufficient
- Paddock and livestock enclosure access points on smallholdings and rural properties
- Garden boundary gates in rural settings where a traditional field gate style suits the surroundings
- Allotment and orchard access where a functional, hardwearing gate is needed without decorative finish
Fitting and handling
Before hanging, store the gate flat and off the ground in a covered, ventilated space to allow it to acclimatise to site conditions and reduce the risk of warping. Fix using heavy-duty hook and band hinges into a solid timber or concrete post, ensuring the hanging post is set at least 600mm into the ground and well braced. No additional painting or staining is required given the UC3 treatment, though a coat of exterior wood preservative will extend the service life further if the gate is in a particularly exposed position.
FAQ
What does UC3 treatment mean for a field gate?
UC3, or Use Class 3, means the timber has been pressure treated with preservative to resist decay and fungal attack in above-ground exterior conditions where it is exposed to rain and moisture. It is suitable for outdoor use but is not intended for direct ground contact, which falls under UC4.
Is a 1200mm field gate wide enough for livestock?
A 1200mm gate is generally suitable for pedestrian access, small livestock such as sheep, and smaller machinery access paths. For cattle, horses, or tractor access you would typically need a wider gate of 2400mm or more. This width suits paddock corners, smaller enclosures, and pedestrian field access points.
Will this gate need treating again after fitting?
The UC3 pressure treatment provides lasting protection without the need for immediate re-treatment. However, applying an exterior wood preservative or oil every couple of years, particularly to cut ends or any drilled fixings, will help maintain the gate and extend its working life in harsh or coastal conditions.
Nottage Timber Merchants supply field gates and fencing materials to trade and retail customers across South Wales from our yard in Bridgend. For posts, rails, and boards to complete your fencing project, browse our fence posts collection. Local customers in the Bridgend area can collect same day, and next-day delivery options are available across South Wales.
