Original: $16.02
-65%$16.02
$5.61The Story
Hardwood Throughout WBP Plywood is a full-hardwood-core sheet bonded with water and boil proof adhesive, making it suitable for furniture, cabinetry, shelving, and protected external builds where strength, clean edges, and moisture resistance all matter. Available from 3.6mm to 12mm in the standard 2440mm x 1220mm sheet size.
Specifications
| Property | Detail |
|---|---|
| Material | Hardwood veneer throughout |
| Treatment | WBP (Water and Boil Proof) adhesive bond |
| Grade | WBP |
| Nominal Size | 2440mm x 1220mm |
| Thickness Options | 3.6mm, 5.5mm, 9mm, 12mm |
What it's used for
- Furniture manufacture and cabinet carcassing where a consistent core and clean-machined edges are required
- Internal shelving, wall panelling, and partitioning in kitchens, utility rooms, and workshops
- Flooring substrates and structural panel work where screw-holding strength matters
- Protected external applications such as outbuildings and covered cladding frames, provided all faces and edges are fully sealed
Fitting and handling
Store sheets flat and off the ground in a dry, ventilated space before use, and allow them to acclimatise to the conditions of the installation area for at least 48 hours. Cut with a fine-toothed blade to reduce breakout on the face veneer, and pre-drill fixings close to edges to avoid splitting. Where the board will be exposed to any moisture, seal all cut edges with a compatible exterior-grade primer or end-grain sealer before fitting.
FAQ
What is the difference between hardwood throughout plywood and standard WBP plywood?
Standard WBP plywood often uses a softwood or mixed-species core with hardwood face veneers. Hardwood throughout plywood uses hardwood veneer across every ply, which gives better screw retention, stronger cut edges, and improved overall stiffness for the same thickness.
Can hardwood WBP plywood be used outside?
The WBP adhesive bond is rated for damp and humid conditions, but the board is not treated against decay. For external use, all faces and edges must be thoroughly sealed with a suitable primer or preservative coating. For fully exposed applications, a marine or exterior-grade treated panel would be a more appropriate choice.
Which thickness should I choose for shelving?
For light-duty shelving with short spans up to around 600mm, 9mm is generally adequate. For heavier loads or spans over 800mm, 12mm will give noticeably less deflection. For drawer bottoms, cabinet backs, or template work, 3.6mm or 5.5mm is usually sufficient.
Nottage Timber Merchants supply hardwood WBP plywood to trade and retail customers across South Wales, with orders available for collection from our Bridgend yard or delivery to the local area. Browse the full range in our plywood collection for all available sheet sizes and thicknesses.
Description
Hardwood Throughout WBP Plywood is a full-hardwood-core sheet bonded with water and boil proof adhesive, making it suitable for furniture, cabinetry, shelving, and protected external builds where strength, clean edges, and moisture resistance all matter. Available from 3.6mm to 12mm in the standard 2440mm x 1220mm sheet size.
Specifications
| Property | Detail |
|---|---|
| Material | Hardwood veneer throughout |
| Treatment | WBP (Water and Boil Proof) adhesive bond |
| Grade | WBP |
| Nominal Size | 2440mm x 1220mm |
| Thickness Options | 3.6mm, 5.5mm, 9mm, 12mm |
What it's used for
- Furniture manufacture and cabinet carcassing where a consistent core and clean-machined edges are required
- Internal shelving, wall panelling, and partitioning in kitchens, utility rooms, and workshops
- Flooring substrates and structural panel work where screw-holding strength matters
- Protected external applications such as outbuildings and covered cladding frames, provided all faces and edges are fully sealed
Fitting and handling
Store sheets flat and off the ground in a dry, ventilated space before use, and allow them to acclimatise to the conditions of the installation area for at least 48 hours. Cut with a fine-toothed blade to reduce breakout on the face veneer, and pre-drill fixings close to edges to avoid splitting. Where the board will be exposed to any moisture, seal all cut edges with a compatible exterior-grade primer or end-grain sealer before fitting.
FAQ
What is the difference between hardwood throughout plywood and standard WBP plywood?
Standard WBP plywood often uses a softwood or mixed-species core with hardwood face veneers. Hardwood throughout plywood uses hardwood veneer across every ply, which gives better screw retention, stronger cut edges, and improved overall stiffness for the same thickness.
Can hardwood WBP plywood be used outside?
The WBP adhesive bond is rated for damp and humid conditions, but the board is not treated against decay. For external use, all faces and edges must be thoroughly sealed with a suitable primer or preservative coating. For fully exposed applications, a marine or exterior-grade treated panel would be a more appropriate choice.
Which thickness should I choose for shelving?
For light-duty shelving with short spans up to around 600mm, 9mm is generally adequate. For heavier loads or spans over 800mm, 12mm will give noticeably less deflection. For drawer bottoms, cabinet backs, or template work, 3.6mm or 5.5mm is usually sufficient.
Nottage Timber Merchants supply hardwood WBP plywood to trade and retail customers across South Wales, with orders available for collection from our Bridgend yard or delivery to the local area. Browse the full range in our plywood collection for all available sheet sizes and thicknesses.
