Original: $7.35
-65%$7.35
$2.57The Story
Metolux 1 Part Wood Filler in Oak is a ready-to-use timber repair filler for filling holes, cracks and surface imperfections in oak and oak-toned wood. Supplied in a 250ml tub, it requires no mixing and dries to a colour-matched finish suitable for interior joinery and flooring repairs.
Specifications
| Material | Ready-mixed wood filler |
|---|---|
| Colour | Oak |
| Size | 250ml tub |
| Parts | 1 part (no mixing required) |
| Use | Interior only |
| Finish | Sandable, paintable or stainable once cured |
What it's used for
- Filling nail holes, screw holes and surface cracks in oak joinery and trim
- Touching up knots, splits and surface blemishes on oak flooring and hardwood boards
- Repairing minor damage to architraves, skirting boards and door frames with an oak or oak-effect finish
- General woodworking and cabinet repairs where a natural oak colour match is needed indoors
Fitting and handling
Apply Metolux 1 Part Wood Filler directly from the tub using a filling knife or spatula, pressing firmly into the repair and slightly overfilling to allow for shrinkage as the filler cures. Allow to dry fully at room temperature before sanding flush with fine-grit abrasive paper, working in the direction of the grain for the smoothest result. Once sanded, the surface can be sealed, varnished or stained, though test compatibility with your chosen finish on a small area first. Reseal the tub tightly after each use to prevent the filler from drying out between applications.
FAQ
Is Metolux 1 Part Wood Filler suitable for oak flooring repairs?
Yes. The oak colour makes it well suited to touching up minor surface damage on oak and oak-effect flooring indoors. For heavily trafficked areas, sand back carefully and apply a compatible floor finish over the repair to protect it.
Can this filler be stained or varnished once dry?
Once fully cured and sanded smooth, the filler can be overpainted or varnished. Staining results can vary because wood filler does not absorb stain in the same way as natural timber, so the oak colour in the product itself provides the colour match rather than the stain. Always test on a small area first.
How long does Metolux 1 Part Wood Filler take to dry?
Drying time depends on the depth of the repair and ambient temperature. Shallow fills in a warm, well-ventilated room typically cure within 30 to 60 minutes. Deeper fills may require longer. Allow the filler to cure fully before sanding to avoid pulling or dragging.
Metolux 1 Part Wood Filler in Oak is available online from Nottage Timber Merchants in Bridgend, South Wales, with fast dispatch to the local area and beyond. Browse our full range of oak mouldings and oak joinery products to complete your project.
Description
Metolux 1 Part Wood Filler in Oak is a ready-to-use timber repair filler for filling holes, cracks and surface imperfections in oak and oak-toned wood. Supplied in a 250ml tub, it requires no mixing and dries to a colour-matched finish suitable for interior joinery and flooring repairs.
Specifications
| Material | Ready-mixed wood filler |
|---|---|
| Colour | Oak |
| Size | 250ml tub |
| Parts | 1 part (no mixing required) |
| Use | Interior only |
| Finish | Sandable, paintable or stainable once cured |
What it's used for
- Filling nail holes, screw holes and surface cracks in oak joinery and trim
- Touching up knots, splits and surface blemishes on oak flooring and hardwood boards
- Repairing minor damage to architraves, skirting boards and door frames with an oak or oak-effect finish
- General woodworking and cabinet repairs where a natural oak colour match is needed indoors
Fitting and handling
Apply Metolux 1 Part Wood Filler directly from the tub using a filling knife or spatula, pressing firmly into the repair and slightly overfilling to allow for shrinkage as the filler cures. Allow to dry fully at room temperature before sanding flush with fine-grit abrasive paper, working in the direction of the grain for the smoothest result. Once sanded, the surface can be sealed, varnished or stained, though test compatibility with your chosen finish on a small area first. Reseal the tub tightly after each use to prevent the filler from drying out between applications.
FAQ
Is Metolux 1 Part Wood Filler suitable for oak flooring repairs?
Yes. The oak colour makes it well suited to touching up minor surface damage on oak and oak-effect flooring indoors. For heavily trafficked areas, sand back carefully and apply a compatible floor finish over the repair to protect it.
Can this filler be stained or varnished once dry?
Once fully cured and sanded smooth, the filler can be overpainted or varnished. Staining results can vary because wood filler does not absorb stain in the same way as natural timber, so the oak colour in the product itself provides the colour match rather than the stain. Always test on a small area first.
How long does Metolux 1 Part Wood Filler take to dry?
Drying time depends on the depth of the repair and ambient temperature. Shallow fills in a warm, well-ventilated room typically cure within 30 to 60 minutes. Deeper fills may require longer. Allow the filler to cure fully before sanding to avoid pulling or dragging.
Metolux 1 Part Wood Filler in Oak is available online from Nottage Timber Merchants in Bridgend, South Wales, with fast dispatch to the local area and beyond. Browse our full range of oak mouldings and oak joinery products to complete your project.
