The Story
Oak dowel rod in 9mm diameter and 2400mm length, machined to a consistent round profile for accurate, repeatable jointing. Solid oak throughout, this versatile rod suits furniture making, shelving, craft work and general woodworking where a clean, natural timber fixing is needed.
Specifications
| Property | Detail |
|---|---|
| Material | Solid oak |
| Profile | Round dowel rod |
| Nominal Diameter | 9mm |
| Length | 2400mm |
| Finish | Machined, sanded smooth |
What it's used for
- Furniture jointing and assembly, including chair rails, cabinet frames and table bases
- Shelf pegs and storage rail supports in fitted wardrobes and freestanding units
- Hanging rails for coat hooks, tool racks and workshop storage
- Craft and hobby projects including dowel beading, model making and decorative woodwork
Fitting and handling
Store the rod horizontally on a flat surface in a dry indoor space before use, allowing it to acclimatise to the room for 24 to 48 hours, particularly in heated interiors where movement is more likely. Cut to your required length with a fine-tooth saw and lightly sand the cut ends to remove any roughness before fitting. The rod takes wood glue, oil, varnish or paint well once the surface has been keyed with 120-grit sandpaper.
FAQ
What diameter hole should I drill for a 9mm oak dowel rod?
Drill a 9mm hole for a snug fit when using adhesive. If you need a sliding or push-fit assembly without glue, a 9.5mm or 10mm bit gives enough clearance without excessive play.
Can I use this oak dowel rod outdoors?
This rod is intended for internal joinery and furniture use. Oak is naturally durable, but without a suitable exterior finish or preservative treatment, prolonged outdoor exposure will cause weathering and checking. For external projects, apply a UV-resistant oil or exterior varnish and keep the rod away from standing water.
Can I buy oak dowel rod cut to a shorter length?
The rod is sold as a full 2400mm length. It cuts cleanly with a tenon saw or mitre saw, so you can section it to your exact requirements on site or in the workshop.
For complementary solid oak mouldings, beadings and trim to finish your project, browse the full range at oak mouldings from Nottage Timber Merchants. We hold real stock at our Bridgend yard in South Wales and offer next-day delivery across the South Wales area.
Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.
Description
Oak dowel rod in 9mm diameter and 2400mm length, machined to a consistent round profile for accurate, repeatable jointing. Solid oak throughout, this versatile rod suits furniture making, shelving, craft work and general woodworking where a clean, natural timber fixing is needed.
Specifications
| Property | Detail |
|---|---|
| Material | Solid oak |
| Profile | Round dowel rod |
| Nominal Diameter | 9mm |
| Length | 2400mm |
| Finish | Machined, sanded smooth |
What it's used for
- Furniture jointing and assembly, including chair rails, cabinet frames and table bases
- Shelf pegs and storage rail supports in fitted wardrobes and freestanding units
- Hanging rails for coat hooks, tool racks and workshop storage
- Craft and hobby projects including dowel beading, model making and decorative woodwork
Fitting and handling
Store the rod horizontally on a flat surface in a dry indoor space before use, allowing it to acclimatise to the room for 24 to 48 hours, particularly in heated interiors where movement is more likely. Cut to your required length with a fine-tooth saw and lightly sand the cut ends to remove any roughness before fitting. The rod takes wood glue, oil, varnish or paint well once the surface has been keyed with 120-grit sandpaper.
FAQ
What diameter hole should I drill for a 9mm oak dowel rod?
Drill a 9mm hole for a snug fit when using adhesive. If you need a sliding or push-fit assembly without glue, a 9.5mm or 10mm bit gives enough clearance without excessive play.
Can I use this oak dowel rod outdoors?
This rod is intended for internal joinery and furniture use. Oak is naturally durable, but without a suitable exterior finish or preservative treatment, prolonged outdoor exposure will cause weathering and checking. For external projects, apply a UV-resistant oil or exterior varnish and keep the rod away from standing water.
Can I buy oak dowel rod cut to a shorter length?
The rod is sold as a full 2400mm length. It cuts cleanly with a tenon saw or mitre saw, so you can section it to your exact requirements on site or in the workshop.
For complementary solid oak mouldings, beadings and trim to finish your project, browse the full range at oak mouldings from Nottage Timber Merchants. We hold real stock at our Bridgend yard in South Wales and offer next-day delivery across the South Wales area.
