Original: $67.64
-65%$67.64
$23.67The Story
A treated sunburst panel measuring 1130mm x 760mm x 760mm x 32mm, this decorative timber gate topper is pressure-treated for outdoor use and designed to add a traditional finishing detail to close-boarded or wooden gates, garden gates, and entrance structures across South Wales and the UK.
Specifications
| Attribute | Detail |
|---|---|
| Material | Timber |
| Treatment | Pressure treated |
| Nominal Size | 1130mm x 760mm x 32mm |
| Profile | Sunburst decorative panel |
| Use Class | Suitable for external use |
What it's used for
- Decorative topper panel for timber garden gates and entrance gates
- Feature infill for close-boarded fence panels or garden structures
- Finishing detail on driveway gate frames and wooden gate pairs
- Architectural accent on pergolas, arbours, or garden screens where a traditional fan design is desired
Fitting and handling
Before fitting, store the panel flat and off the ground in a dry, ventilated space to allow it to acclimatise to local conditions for at least 48 hours. When fixing, use exterior-grade screws or coach bolts and ensure the panel sits within a well-constructed timber frame to prevent racking or movement. Although the timber is pressure treated, applying an additional coat of exterior wood preservative or paint to cut ends after sizing will extend the service life considerably.
FAQ
What size gate does the 1130mm x 760mm sunburst panel fit?
The panel is 1130mm wide and 760mm tall, making it suitable for standard single garden gates or as a topper section on wider entrance gates where the frame opening matches or can be adjusted to these dimensions.
Is this sunburst panel pre-treated or does it need treating before installation?
The panel is supplied pressure treated, giving it resistance to rot and fungal decay straight from the pack. We recommend sealing any cut edges with an end-grain preservative before fitting to maintain full protection outdoors.
Can I paint or stain the treated sunburst panel?
Yes. Once the timber has dried to the touch after treatment, a good-quality exterior wood stain or paint can be applied. Allow adequate drying time and lightly sand any rough surfaces before coating for the best finish.
Browse our full range of fence cladding and decorative fencing panels at Nottage Timber Merchants. We supply customers across Bridgend and throughout South Wales, with next-day delivery available to many local postcodes.
Description
A treated sunburst panel measuring 1130mm x 760mm x 760mm x 32mm, this decorative timber gate topper is pressure-treated for outdoor use and designed to add a traditional finishing detail to close-boarded or wooden gates, garden gates, and entrance structures across South Wales and the UK.
Specifications
| Attribute | Detail |
|---|---|
| Material | Timber |
| Treatment | Pressure treated |
| Nominal Size | 1130mm x 760mm x 32mm |
| Profile | Sunburst decorative panel |
| Use Class | Suitable for external use |
What it's used for
- Decorative topper panel for timber garden gates and entrance gates
- Feature infill for close-boarded fence panels or garden structures
- Finishing detail on driveway gate frames and wooden gate pairs
- Architectural accent on pergolas, arbours, or garden screens where a traditional fan design is desired
Fitting and handling
Before fitting, store the panel flat and off the ground in a dry, ventilated space to allow it to acclimatise to local conditions for at least 48 hours. When fixing, use exterior-grade screws or coach bolts and ensure the panel sits within a well-constructed timber frame to prevent racking or movement. Although the timber is pressure treated, applying an additional coat of exterior wood preservative or paint to cut ends after sizing will extend the service life considerably.
FAQ
What size gate does the 1130mm x 760mm sunburst panel fit?
The panel is 1130mm wide and 760mm tall, making it suitable for standard single garden gates or as a topper section on wider entrance gates where the frame opening matches or can be adjusted to these dimensions.
Is this sunburst panel pre-treated or does it need treating before installation?
The panel is supplied pressure treated, giving it resistance to rot and fungal decay straight from the pack. We recommend sealing any cut edges with an end-grain preservative before fitting to maintain full protection outdoors.
Can I paint or stain the treated sunburst panel?
Yes. Once the timber has dried to the touch after treatment, a good-quality exterior wood stain or paint can be applied. Allow adequate drying time and lightly sand any rough surfaces before coating for the best finish.
Browse our full range of fence cladding and decorative fencing panels at Nottage Timber Merchants. We supply customers across Bridgend and throughout South Wales, with next-day delivery available to many local postcodes.
