Original: $16.02
-65%$16.02
$5.61The Story
White oak stop chamfer spindles measuring 41mm x 41mm x 900mm are a solid timber balustrade component suited to staircase and landing installations. Cut from solid white oak, the stop chamfer profile delivers a clean, traditional detail compatible with both period and contemporary stair designs.
Specifications
| Property | Detail |
|---|---|
| Material | Solid white oak |
| Nominal Size | 41mm x 41mm x 900mm |
| Profile | Stop chamfer |
| Finish | Unfinished |
What it's used for
- Staircase balustrades as vertical infill spindles between base rail and handrail
- Landing infill panels where a 41mm balustrade system is specified
- Oak stair renovation projects replacing worn or damaged spindles on a like-for-like basis
- New-build stair installations requiring a classic chamfered detail to match oak newel posts and handrails
Fitting and handling
Allow the spindles to acclimatise in the installation environment for at least 48 hours before fitting, particularly in heated properties, to reduce the risk of movement after fixing. Spindles are typically secured using a brad nailer or wood adhesive into routed slots in the base rail and handrail, following the stair manufacturer's recommended spacing, usually 99mm centre to centre. Leave unfinished until fixed in place, then apply your chosen oil, wax, or lacquer for a consistent result across the full balustrade.
FAQ
Will these spindles fit a standard 41mm balustrade system without alteration?
Yes. At 41mm square, these spindles are sized to drop directly into standard 41mm routed base rails and handrails without any additional cutting or planing.
Can I mix these stop chamfer spindles with square-top oak spindles on the same staircase?
It is possible to mix profiles, but most joiners and designers recommend keeping a single spindle profile throughout a staircase run for a consistent appearance. If you are matching an existing installation, bring a sample spindle when ordering.
Do these spindles need treating before installation?
They are supplied unfinished, so you can apply your preferred finish. For interior staircases, a hard-wax oil or satin lacquer is common. Apply a base coat before fixing if access between spindles will be restricted once installed.
Browse the full range of oak mouldings and stair components at Nottage Timber Merchants. We supply trade and retail customers across Bridgend and South Wales, with next-day delivery available to many local postcodes.
Description
White oak stop chamfer spindles measuring 41mm x 41mm x 900mm are a solid timber balustrade component suited to staircase and landing installations. Cut from solid white oak, the stop chamfer profile delivers a clean, traditional detail compatible with both period and contemporary stair designs.
Specifications
| Property | Detail |
|---|---|
| Material | Solid white oak |
| Nominal Size | 41mm x 41mm x 900mm |
| Profile | Stop chamfer |
| Finish | Unfinished |
What it's used for
- Staircase balustrades as vertical infill spindles between base rail and handrail
- Landing infill panels where a 41mm balustrade system is specified
- Oak stair renovation projects replacing worn or damaged spindles on a like-for-like basis
- New-build stair installations requiring a classic chamfered detail to match oak newel posts and handrails
Fitting and handling
Allow the spindles to acclimatise in the installation environment for at least 48 hours before fitting, particularly in heated properties, to reduce the risk of movement after fixing. Spindles are typically secured using a brad nailer or wood adhesive into routed slots in the base rail and handrail, following the stair manufacturer's recommended spacing, usually 99mm centre to centre. Leave unfinished until fixed in place, then apply your chosen oil, wax, or lacquer for a consistent result across the full balustrade.
FAQ
Will these spindles fit a standard 41mm balustrade system without alteration?
Yes. At 41mm square, these spindles are sized to drop directly into standard 41mm routed base rails and handrails without any additional cutting or planing.
Can I mix these stop chamfer spindles with square-top oak spindles on the same staircase?
It is possible to mix profiles, but most joiners and designers recommend keeping a single spindle profile throughout a staircase run for a consistent appearance. If you are matching an existing installation, bring a sample spindle when ordering.
Do these spindles need treating before installation?
They are supplied unfinished, so you can apply your preferred finish. For interior staircases, a hard-wax oil or satin lacquer is common. Apply a base coat before fixing if access between spindles will be restricted once installed.
Browse the full range of oak mouldings and stair components at Nottage Timber Merchants. We supply trade and retail customers across Bridgend and South Wales, with next-day delivery available to many local postcodes.
