Original: $10.86
-65%$10.86
$3.80The Story
Light hardwood dowel rod 25mm x 25mm x 2400mm is a smooth-turned, round-profile timber length suited to furniture making, dowel joinery, tool handles and general woodworking. Machined to a consistent diameter along its full 2400mm length, it is ready to cut, sand and finish on arrival.
Specifications
| Property | Detail |
|---|---|
| Material | Light hardwood |
| Nominal Size | 25mm x 25mm |
| Length | 2400mm |
| Profile | Round dowel rod |
| Finish | Smooth turned, sanded |
What it's used for
- Furniture making and cabinet joinery, including rail and stretcher connections
- Reinforcing glued joints as a direct alternative to screws or nails in lighter structural applications
- Curtain poles, peg rails and decorative beadings where a clean round section is required
- Tool handles, hobby projects and craft work where a uniform diameter is essential
Fitting and handling
Store dowel rods flat and off the ground in a dry, well-ventilated space before use; light hardwood can move slightly if exposed to damp conditions before fitting. When using dowels for joinery, apply a suitable wood glue evenly to the hole and the dowel, then clamp the joint while the adhesive cures fully. Finish with oil, varnish or paint once cut to length and lightly sanded to your desired profile.
FAQ
What diameter is this dowel rod?
This dowel rod is turned to a 25mm round diameter along its full 2400mm length. The cross-section is circular, so the 25mm figure refers to the diameter, not a square dimension.
Can this light hardwood dowel be painted or varnished?
Yes. The smooth-turned finish means it accepts most wood paints, varnishes and oils without heavy preparation. A light sand with fine-grade abrasive paper before applying your chosen finish is all that is normally needed.
Is this dowel rod suitable for outdoor use?
Light hardwood dowel rod in this specification is intended for interior joinery and furniture use. It is not treated for outdoor or ground-contact applications, so it should not be used in exposed or damp external conditions without appropriate finishing and protection.
Browse the full range of oak mouldings and timber sections at Nottage Timber Merchants. We supply trade and retail customers across Bridgend and South Wales, with competitive pricing and reliable dispatch on stocked lines.
Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.
Description
Light hardwood dowel rod 25mm x 25mm x 2400mm is a smooth-turned, round-profile timber length suited to furniture making, dowel joinery, tool handles and general woodworking. Machined to a consistent diameter along its full 2400mm length, it is ready to cut, sand and finish on arrival.
Specifications
| Property | Detail |
|---|---|
| Material | Light hardwood |
| Nominal Size | 25mm x 25mm |
| Length | 2400mm |
| Profile | Round dowel rod |
| Finish | Smooth turned, sanded |
What it's used for
- Furniture making and cabinet joinery, including rail and stretcher connections
- Reinforcing glued joints as a direct alternative to screws or nails in lighter structural applications
- Curtain poles, peg rails and decorative beadings where a clean round section is required
- Tool handles, hobby projects and craft work where a uniform diameter is essential
Fitting and handling
Store dowel rods flat and off the ground in a dry, well-ventilated space before use; light hardwood can move slightly if exposed to damp conditions before fitting. When using dowels for joinery, apply a suitable wood glue evenly to the hole and the dowel, then clamp the joint while the adhesive cures fully. Finish with oil, varnish or paint once cut to length and lightly sanded to your desired profile.
FAQ
What diameter is this dowel rod?
This dowel rod is turned to a 25mm round diameter along its full 2400mm length. The cross-section is circular, so the 25mm figure refers to the diameter, not a square dimension.
Can this light hardwood dowel be painted or varnished?
Yes. The smooth-turned finish means it accepts most wood paints, varnishes and oils without heavy preparation. A light sand with fine-grade abrasive paper before applying your chosen finish is all that is normally needed.
Is this dowel rod suitable for outdoor use?
Light hardwood dowel rod in this specification is intended for interior joinery and furniture use. It is not treated for outdoor or ground-contact applications, so it should not be used in exposed or damp external conditions without appropriate finishing and protection.
Browse the full range of oak mouldings and timber sections at Nottage Timber Merchants. We supply trade and retail customers across Bridgend and South Wales, with competitive pricing and reliable dispatch on stocked lines.
