Original: $4.77
-65%$4.77
$1.67The Story
Pine dowel rod 18mm diameter in a 2400mm length, machined to a consistently round profile for use in furniture making, joinery joints, craft work and general DIY. Smooth-turned from softwood pine, each rod takes paint, varnish or oil well after a light sand.
Specifications
| Property | Detail |
|---|---|
| Material | Pine (softwood) |
| Finish | Smooth machined, precision-turned |
| Nominal Size | 18mm x 18mm |
| Profile | Round dowel rod |
| Length | 2400mm |
What it's used for
- Dowel joints in cabinet making and furniture assembly, providing a clean, glued fixing without visible fixings
- Hanging rails and wardrobe rails where a smooth, round bar is required
- Curtain poles and display rails in lightweight domestic applications
- Craft and hobby projects including model making, tool handles and educational woodwork
Fitting and handling
Store pine dowel rod flat in a dry, ventilated space and allow it to acclimatise for at least 48 hours before use, particularly if moving it from a cold store into a heated interior, as pine can move slightly with changes in humidity. When using as a dowel joint, apply a suitable PVA wood glue evenly around the rod before seating it, and clamp until fully cured. For a painted or varnished finish, lightly sand with 120-grit paper along the grain before applying your chosen coating.
FAQ
What diameter drill bit do I need for an 18mm dowel rod?
You need an 18mm drill bit for a snug fit. For a glued joint, this should give just enough clearance for the adhesive. Test on a scrap piece first, as some bits cut fractionally over or under size.
Can I use this pine dowel rod outdoors?
Pine is an untreated softwood and is not suitable for prolonged outdoor exposure without a protective finish. For outdoor applications, apply an exterior-grade preservative, paint or oil, and avoid direct ground contact. For structural outdoor use, a treated timber would be more appropriate.
Can I cut the 2400mm length down to shorter pieces?
Yes. The 2400mm rod can be cut to any shorter length using a fine-toothed saw. Score around the circumference lightly first to help prevent the grain from splintering at the cut line, and sand the cut end smooth before fitting.
Browse the full range of pine mouldings and pine sections at Nottage Timber Merchants. We supply trade and retail customers throughout Bridgend and South Wales, with straightforward collection available from our Bridgend merchant yard.
Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.
Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.
Description
Pine dowel rod 18mm diameter in a 2400mm length, machined to a consistently round profile for use in furniture making, joinery joints, craft work and general DIY. Smooth-turned from softwood pine, each rod takes paint, varnish or oil well after a light sand.
Specifications
| Property | Detail |
|---|---|
| Material | Pine (softwood) |
| Finish | Smooth machined, precision-turned |
| Nominal Size | 18mm x 18mm |
| Profile | Round dowel rod |
| Length | 2400mm |
What it's used for
- Dowel joints in cabinet making and furniture assembly, providing a clean, glued fixing without visible fixings
- Hanging rails and wardrobe rails where a smooth, round bar is required
- Curtain poles and display rails in lightweight domestic applications
- Craft and hobby projects including model making, tool handles and educational woodwork
Fitting and handling
Store pine dowel rod flat in a dry, ventilated space and allow it to acclimatise for at least 48 hours before use, particularly if moving it from a cold store into a heated interior, as pine can move slightly with changes in humidity. When using as a dowel joint, apply a suitable PVA wood glue evenly around the rod before seating it, and clamp until fully cured. For a painted or varnished finish, lightly sand with 120-grit paper along the grain before applying your chosen coating.
FAQ
What diameter drill bit do I need for an 18mm dowel rod?
You need an 18mm drill bit for a snug fit. For a glued joint, this should give just enough clearance for the adhesive. Test on a scrap piece first, as some bits cut fractionally over or under size.
Can I use this pine dowel rod outdoors?
Pine is an untreated softwood and is not suitable for prolonged outdoor exposure without a protective finish. For outdoor applications, apply an exterior-grade preservative, paint or oil, and avoid direct ground contact. For structural outdoor use, a treated timber would be more appropriate.
Can I cut the 2400mm length down to shorter pieces?
Yes. The 2400mm rod can be cut to any shorter length using a fine-toothed saw. Score around the circumference lightly first to help prevent the grain from splintering at the cut line, and sand the cut end smooth before fitting.
Browse the full range of pine mouldings and pine sections at Nottage Timber Merchants. We supply trade and retail customers throughout Bridgend and South Wales, with straightforward collection available from our Bridgend merchant yard.
