Original: $1.63
-65%$1.63
$0.57The Story
Pine dowel rod 9mm x 2400mm is a machined round timber pin used across joinery, furniture making, and craft work. Supplied in a 2400mm length, it cuts cleanly, accepts a smooth finish, and fits accurately into a standard 9mm drilled hole.
Specifications
| Property | Detail |
|---|---|
| Material | Pine (softwood) |
| Nominal Size | 9mm diameter x 2400mm length |
| Profile | Round, full-length cylinder |
| Finish | Sanded, ready to paint, oil, or varnish |
What it's used for
- Dowel joints in cabinet and furniture construction, replacing screws or nails for a clean face finish
- Shelf peg and rail supports in wardrobes, bookcases, and storage units
- Craft and hobby projects including model making, toy construction, and decorative beading work
- Replacement and repair of existing dowel joints in chairs, tables, and fitted furniture
Fitting and handling
Store pine dowel rod flat and dry before use, away from damp or direct heat, to prevent warping or swelling that could cause a tight fit in the hole. When joining, apply a thin, even bead of PVA wood glue to the dowel before insertion and allow adequate clamping time for a secure bond. Once set, any proud timber can be pared flush with a chisel and sanded smooth before painting, oiling, or varnishing to your chosen finish.
FAQ
What drill bit size do I need for a 9mm dowel rod?
Use a 9mm brad-point or spade bit for a snug fit. If you need a looser sliding fit, such as for a removable shelf peg, a 9.5mm bit gives a small amount of clearance without being sloppy.
Can I use this dowel rod outside?
This pine dowel is untreated and is intended for internal use. For outdoor applications, you would need a pressure-treated or naturally durable timber. Contact Nottage Timber Merchants if you need advice on suitable alternatives.
How many dowel rods do I need for a standard furniture joint?
A typical face-frame or board-to-board joint uses two dowels spaced roughly 32mm apart to resist rotation. For a longer joint, such as a worktop butt joint, space dowels every 150-200mm along the length for adequate alignment and strength.
Browse the full range of pine mouldings and pine sections at Nottage Timber Merchants. We supply trade and DIY customers across Bridgend and South Wales, with next-day delivery available to most local postcodes.
Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.
Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.
Description
Pine dowel rod 9mm x 2400mm is a machined round timber pin used across joinery, furniture making, and craft work. Supplied in a 2400mm length, it cuts cleanly, accepts a smooth finish, and fits accurately into a standard 9mm drilled hole.
Specifications
| Property | Detail |
|---|---|
| Material | Pine (softwood) |
| Nominal Size | 9mm diameter x 2400mm length |
| Profile | Round, full-length cylinder |
| Finish | Sanded, ready to paint, oil, or varnish |
What it's used for
- Dowel joints in cabinet and furniture construction, replacing screws or nails for a clean face finish
- Shelf peg and rail supports in wardrobes, bookcases, and storage units
- Craft and hobby projects including model making, toy construction, and decorative beading work
- Replacement and repair of existing dowel joints in chairs, tables, and fitted furniture
Fitting and handling
Store pine dowel rod flat and dry before use, away from damp or direct heat, to prevent warping or swelling that could cause a tight fit in the hole. When joining, apply a thin, even bead of PVA wood glue to the dowel before insertion and allow adequate clamping time for a secure bond. Once set, any proud timber can be pared flush with a chisel and sanded smooth before painting, oiling, or varnishing to your chosen finish.
FAQ
What drill bit size do I need for a 9mm dowel rod?
Use a 9mm brad-point or spade bit for a snug fit. If you need a looser sliding fit, such as for a removable shelf peg, a 9.5mm bit gives a small amount of clearance without being sloppy.
Can I use this dowel rod outside?
This pine dowel is untreated and is intended for internal use. For outdoor applications, you would need a pressure-treated or naturally durable timber. Contact Nottage Timber Merchants if you need advice on suitable alternatives.
How many dowel rods do I need for a standard furniture joint?
A typical face-frame or board-to-board joint uses two dowels spaced roughly 32mm apart to resist rotation. For a longer joint, such as a worktop butt joint, space dowels every 150-200mm along the length for adequate alignment and strength.
Browse the full range of pine mouldings and pine sections at Nottage Timber Merchants. We supply trade and DIY customers across Bridgend and South Wales, with next-day delivery available to most local postcodes.
