Original: $1.82
-65%$1.82
$0.64The Story
Pine dowel rod 12mm x 2400mm is a smooth, round timber section used across joinery, furniture making and general DIY. Cut from consistent-grain pine and machined to a true 12mm diameter, each 2400mm length offers a reliable, screw-free method of creating clean, tight-fitting joints.
Specifications
| Property | Detail |
|---|---|
| Material | Pine |
| Profile | Round dowel rod |
| Nominal Diameter | 12mm |
| Length | 2400mm |
| Finish | Sanded, smooth |
What it's used for
- Furniture joinery - connecting rails, legs and frames without screws or metal fixings
- Cabinet making - aligning and strengthening carcass joints in kitchens, wardrobes and shelving units
- Craft and hobby work - model making, tool handles, wooden toy components and decorative beading projects
- General DIY repairs - replacing broken dowels in chairs, beds and flat-pack furniture
Fitting and handling
Store pine dowel rod flat and off the ground in a dry, ventilated space before use - pine will absorb moisture if left in damp conditions and may swell slightly, making a tight fit even tighter. When jointing, drill to a matching 12mm diameter using a sharp bit and apply a thin, even coat of PVA wood glue to the dowel before pressing firmly into the hole. Once dry, the surface takes varnish, oil or paint well after a light sand with 120-grit paper.
FAQ
What drill bit size do I need for a 12mm dowel rod?
Use a 12mm drill bit for a snug fit. If you want a slightly looser fit to allow for glue, a 12.5mm bit gives a little extra clearance. Always drill to a consistent depth using a drill stop or tape marker to keep joints flush.
Can I cut pine dowel rod to shorter lengths?
Yes. A fine-toothed hand saw or mitre saw will cut cleanly through 12mm pine dowel. Lightly sand the cut end to remove any burr before fitting. The full 2400mm length can be cut into multiple shorter pegs as needed.
Is this dowel rod suitable for outdoor use?
Pine dowel rod is intended for interior use. If used in an exposed or damp environment, it should be fully sealed with an exterior-grade finish, though for structural outdoor joinery a treated or hardwood alternative would be more appropriate.
Browse the full range of pine mouldings at Nottage Timber Merchants for complementary sections and profiles. We supply trade and retail customers across Bridgend and South Wales, with next-day delivery available to most local postcodes.
Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.
Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.
Description
Pine dowel rod 12mm x 2400mm is a smooth, round timber section used across joinery, furniture making and general DIY. Cut from consistent-grain pine and machined to a true 12mm diameter, each 2400mm length offers a reliable, screw-free method of creating clean, tight-fitting joints.
Specifications
| Property | Detail |
|---|---|
| Material | Pine |
| Profile | Round dowel rod |
| Nominal Diameter | 12mm |
| Length | 2400mm |
| Finish | Sanded, smooth |
What it's used for
- Furniture joinery - connecting rails, legs and frames without screws or metal fixings
- Cabinet making - aligning and strengthening carcass joints in kitchens, wardrobes and shelving units
- Craft and hobby work - model making, tool handles, wooden toy components and decorative beading projects
- General DIY repairs - replacing broken dowels in chairs, beds and flat-pack furniture
Fitting and handling
Store pine dowel rod flat and off the ground in a dry, ventilated space before use - pine will absorb moisture if left in damp conditions and may swell slightly, making a tight fit even tighter. When jointing, drill to a matching 12mm diameter using a sharp bit and apply a thin, even coat of PVA wood glue to the dowel before pressing firmly into the hole. Once dry, the surface takes varnish, oil or paint well after a light sand with 120-grit paper.
FAQ
What drill bit size do I need for a 12mm dowel rod?
Use a 12mm drill bit for a snug fit. If you want a slightly looser fit to allow for glue, a 12.5mm bit gives a little extra clearance. Always drill to a consistent depth using a drill stop or tape marker to keep joints flush.
Can I cut pine dowel rod to shorter lengths?
Yes. A fine-toothed hand saw or mitre saw will cut cleanly through 12mm pine dowel. Lightly sand the cut end to remove any burr before fitting. The full 2400mm length can be cut into multiple shorter pegs as needed.
Is this dowel rod suitable for outdoor use?
Pine dowel rod is intended for interior use. If used in an exposed or damp environment, it should be fully sealed with an exterior-grade finish, though for structural outdoor joinery a treated or hardwood alternative would be more appropriate.
Browse the full range of pine mouldings at Nottage Timber Merchants for complementary sections and profiles. We supply trade and retail customers across Bridgend and South Wales, with next-day delivery available to most local postcodes.
