The Story
Everbuild 502 Wood Adhesive is a clear-drying, PVA-based wood glue supplied in a 1 litre bottle. It forms a fast-grab, flexible bond on wood, MDF, chipboard, and hardboard, making it a reliable choice for interior joinery and general woodworking tasks.
Specifications
| Product | Everbuild 502 Wood Adhesive |
|---|---|
| Type | PVA-based wood adhesive |
| Finish | Dries clear |
| Size | 1 litre bottle |
| Use | Interior only |
| Bond type | Fast-grab, flexible |
What it's used for
- Bonding timber components in interior joinery work, including door frames, linings, and mouldings
- Gluing MDF, chipboard, and hardboard panels in cabinet making and shopfitting
- General workshop assembly where a clean, invisible glue line is needed
- Repair and patching work on skirting boards, architraves, and similar timber trim
Fitting and handling
Apply Everbuild 502 to one or both surfaces, press firmly together, and clamp until fully set. For best results on porous timber, apply a thin second coat if the first is absorbed quickly before pressing the joint. Store the bottle in a cool, dry place with the cap securely closed to prevent the adhesive from skinning over between uses.
FAQ
Is Everbuild 502 suitable for outdoor use?
No. Everbuild 502 is formulated for interior use only. For external joinery or any application exposed to moisture, you would need a waterproof wood adhesive rated for outdoor conditions, such as a D3 or D4 classified product.
How long does Everbuild 502 take to set?
Initial grab is fast, but clamping time varies depending on the timber species, temperature, and how much adhesive was applied. As a general guide, keep joints clamped for at least 30 to 60 minutes, and allow a full 24 hours before applying any load or stress to the joint.
Will it dry clear on light-coloured timber or MDF?
Yes. Everbuild 502 dries to a clear finish, so squeeze-out that is wiped away cleanly before setting should leave no visible residue. On pale timber or primed MDF, wipe away any excess with a damp cloth while the adhesive is still wet for the neatest result.
Everbuild 502 Wood Adhesive pairs well with the timber products available at Nottage Timber Merchants. Browse our MDF sheets collection for boards ready to bond and build with, available to order online with delivery across the South Wales and Bridgend area.
Description
Everbuild 502 Wood Adhesive is a clear-drying, PVA-based wood glue supplied in a 1 litre bottle. It forms a fast-grab, flexible bond on wood, MDF, chipboard, and hardboard, making it a reliable choice for interior joinery and general woodworking tasks.
Specifications
| Product | Everbuild 502 Wood Adhesive |
|---|---|
| Type | PVA-based wood adhesive |
| Finish | Dries clear |
| Size | 1 litre bottle |
| Use | Interior only |
| Bond type | Fast-grab, flexible |
What it's used for
- Bonding timber components in interior joinery work, including door frames, linings, and mouldings
- Gluing MDF, chipboard, and hardboard panels in cabinet making and shopfitting
- General workshop assembly where a clean, invisible glue line is needed
- Repair and patching work on skirting boards, architraves, and similar timber trim
Fitting and handling
Apply Everbuild 502 to one or both surfaces, press firmly together, and clamp until fully set. For best results on porous timber, apply a thin second coat if the first is absorbed quickly before pressing the joint. Store the bottle in a cool, dry place with the cap securely closed to prevent the adhesive from skinning over between uses.
FAQ
Is Everbuild 502 suitable for outdoor use?
No. Everbuild 502 is formulated for interior use only. For external joinery or any application exposed to moisture, you would need a waterproof wood adhesive rated for outdoor conditions, such as a D3 or D4 classified product.
How long does Everbuild 502 take to set?
Initial grab is fast, but clamping time varies depending on the timber species, temperature, and how much adhesive was applied. As a general guide, keep joints clamped for at least 30 to 60 minutes, and allow a full 24 hours before applying any load or stress to the joint.
Will it dry clear on light-coloured timber or MDF?
Yes. Everbuild 502 dries to a clear finish, so squeeze-out that is wiped away cleanly before setting should leave no visible residue. On pale timber or primed MDF, wipe away any excess with a damp cloth while the adhesive is still wet for the neatest result.
Everbuild 502 Wood Adhesive pairs well with the timber products available at Nottage Timber Merchants. Browse our MDF sheets collection for boards ready to bond and build with, available to order online with delivery across the South Wales and Bridgend area.
