The Story
PU wood adhesive with a 30-minute open time gives you a reliable structural bond on timber, MDF, plywood and most porous materials. Supplied as a liquid formula in a 750g bottle, this polyurethane adhesive cures water-resistant, making it suitable for interior and exterior joinery work.
Specifications
| Property | Detail |
|---|---|
| Type | Polyurethane (PU) wood adhesive |
| Formula | Liquid |
| Pack size | 750g bottle |
| Open time | Approximately 30 minutes |
| Water resistance | Water-resistant once fully cured |
| Suitable substrates | Timber, MDF, plywood, most porous materials |
| Use | Interior and exterior joinery applications |
What it's used for
- Furniture making and cabinet assembly where accurate positioning is needed before the adhesive sets
- General carpentry and structural joinery, including door frames, stair components and architraves
- Exterior timber projects such as decking subframes, garden structures and fence components where moisture resistance matters
- Bonding MDF, plywood and sheet materials during workshop fabrication or site installation
Fitting and handling
Apply the adhesive evenly to one or both surfaces and bring the joint together within the 30-minute open time, clamping firmly until fully cured. Store the bottle upright in a cool, dry location and replace the cap immediately after use to prevent the liquid from skinning or setting in the nozzle. Work in temperatures above 5 degrees Celsius for best results, and wipe away any squeeze-out before it cures, as hardened PU adhesive is difficult to remove cleanly from finished surfaces.
FAQ
How long does PU wood adhesive take to fully cure?
The 30-minute open time refers to how long you have to position the joint before the adhesive begins to set. Full cure typically takes several hours depending on temperature, humidity and the substrates being bonded. Maintain clamping pressure for at least one to two hours before disturbing the joint.
Is this adhesive suitable for outdoor timber use in the UK?
Yes. Once cured, this polyurethane adhesive is water-resistant, making it appropriate for exterior joinery applications such as garden furniture, decking framework and outdoor timber structures. It is not a marine-grade resorcinol adhesive, so for fully submerged or prolonged water immersion applications a specialist product would be needed.
Can I use PU wood adhesive on MDF and plywood as well as solid timber?
Yes. The liquid formula bonds well to MDF, plywood and other engineered wood panels alongside solid timber. Ensure surfaces are clean, free from dust and not excessively oily or sealed before applying the adhesive for the strongest joint.
Nottage Timber Merchants supply this PU wood adhesive alongside a full range of sheet materials including MDF, plywood and OSB. Browse our MDF sheets collection online, or visit our Bridgend yard in South Wales. Next-day delivery is available to the Bridgend and wider South Wales area.
Description
PU wood adhesive with a 30-minute open time gives you a reliable structural bond on timber, MDF, plywood and most porous materials. Supplied as a liquid formula in a 750g bottle, this polyurethane adhesive cures water-resistant, making it suitable for interior and exterior joinery work.
Specifications
| Property | Detail |
|---|---|
| Type | Polyurethane (PU) wood adhesive |
| Formula | Liquid |
| Pack size | 750g bottle |
| Open time | Approximately 30 minutes |
| Water resistance | Water-resistant once fully cured |
| Suitable substrates | Timber, MDF, plywood, most porous materials |
| Use | Interior and exterior joinery applications |
What it's used for
- Furniture making and cabinet assembly where accurate positioning is needed before the adhesive sets
- General carpentry and structural joinery, including door frames, stair components and architraves
- Exterior timber projects such as decking subframes, garden structures and fence components where moisture resistance matters
- Bonding MDF, plywood and sheet materials during workshop fabrication or site installation
Fitting and handling
Apply the adhesive evenly to one or both surfaces and bring the joint together within the 30-minute open time, clamping firmly until fully cured. Store the bottle upright in a cool, dry location and replace the cap immediately after use to prevent the liquid from skinning or setting in the nozzle. Work in temperatures above 5 degrees Celsius for best results, and wipe away any squeeze-out before it cures, as hardened PU adhesive is difficult to remove cleanly from finished surfaces.
FAQ
How long does PU wood adhesive take to fully cure?
The 30-minute open time refers to how long you have to position the joint before the adhesive begins to set. Full cure typically takes several hours depending on temperature, humidity and the substrates being bonded. Maintain clamping pressure for at least one to two hours before disturbing the joint.
Is this adhesive suitable for outdoor timber use in the UK?
Yes. Once cured, this polyurethane adhesive is water-resistant, making it appropriate for exterior joinery applications such as garden furniture, decking framework and outdoor timber structures. It is not a marine-grade resorcinol adhesive, so for fully submerged or prolonged water immersion applications a specialist product would be needed.
Can I use PU wood adhesive on MDF and plywood as well as solid timber?
Yes. The liquid formula bonds well to MDF, plywood and other engineered wood panels alongside solid timber. Ensure surfaces are clean, free from dust and not excessively oily or sealed before applying the adhesive for the strongest joint.
Nottage Timber Merchants supply this PU wood adhesive alongside a full range of sheet materials including MDF, plywood and OSB. Browse our MDF sheets collection online, or visit our Bridgend yard in South Wales. Next-day delivery is available to the Bridgend and wider South Wales area.
