Original: $20.84
-65%$20.84
$7.29The Story
Waterproof D4 wood adhesive from Everbuild delivers a high-strength, weather-resistant bond on timber joints exposed to moisture and outdoor conditions. This 1 litre PVA-based formula meets EN 204 D4 classification, making it suitable for interior and exterior joinery where a rigid, durable glue line is required.
Specifications
| Property | Detail |
|---|---|
| Product Type | Wood adhesive |
| Classification | EN 204 D4 (fully waterproof) |
| Base | PVA-based |
| Volume | 1 litre |
| Suitable Use | Interior and exterior |
| Finish when cured | Rigid, sandable, machinable |
What it's used for
- Bonding exterior joinery components such as door frames, window frames, and cills where exposure to rain and humidity is likely
- Cabinet making and furniture assembly where a strong, gap-filling glue line is needed on hardwood or softwood substrates
- Site carpentry applications including staircase components, architraves, and skirting joints in wet-prone areas
- General woodworking repairs and fabrication where a D4-rated waterproof adhesive is specified
Fitting and handling
Apply Everbuild D4 adhesive evenly to both surfaces where possible, clamp the joint firmly, and allow a minimum cure time before removing clamps - check the product datasheet for full open and closed times, which vary with temperature. Once fully cured the glue line can be sanded flush or machined without issue, making it well suited to finishing-grade joinery. Store the bottle upright in frost-free conditions and replace the cap securely after each use to prevent skinning.
FAQ
What does D4 classification mean for wood adhesive?
D4 is the highest durability class under EN 204, meaning the adhesive has been tested to withstand prolonged exposure to water and high humidity. It is suitable for exterior joinery and applications where joints may be regularly wetted, such as garden furniture, gates, or external door frames.
Can Everbuild D4 adhesive be used on hardwoods as well as softwoods?
Yes. The adhesive bonds well to a wide range of timber species including oak, pine, and other common hardwoods and softwoods used in joinery and furniture production. Ensure surfaces are clean, dry, and free from dust or grease before applying.
How long does Everbuild D4 wood adhesive take to cure fully?
Initial set typically occurs within 30 to 60 minutes under clamp pressure at room temperature, but full cure strength develops over 24 hours. Cooler conditions slow the cure, so allow additional time in winter or on cold sites before machining or loading the joint.
Nottage Timber Merchants supply Everbuild D4 adhesive alongside a full range of timber and joinery materials. Browse our ironmongery and fixings collection for complementary products. We offer next-day delivery across South Wales and to the Bridgend area, or you can collect in store.
Description
Waterproof D4 wood adhesive from Everbuild delivers a high-strength, weather-resistant bond on timber joints exposed to moisture and outdoor conditions. This 1 litre PVA-based formula meets EN 204 D4 classification, making it suitable for interior and exterior joinery where a rigid, durable glue line is required.
Specifications
| Property | Detail |
|---|---|
| Product Type | Wood adhesive |
| Classification | EN 204 D4 (fully waterproof) |
| Base | PVA-based |
| Volume | 1 litre |
| Suitable Use | Interior and exterior |
| Finish when cured | Rigid, sandable, machinable |
What it's used for
- Bonding exterior joinery components such as door frames, window frames, and cills where exposure to rain and humidity is likely
- Cabinet making and furniture assembly where a strong, gap-filling glue line is needed on hardwood or softwood substrates
- Site carpentry applications including staircase components, architraves, and skirting joints in wet-prone areas
- General woodworking repairs and fabrication where a D4-rated waterproof adhesive is specified
Fitting and handling
Apply Everbuild D4 adhesive evenly to both surfaces where possible, clamp the joint firmly, and allow a minimum cure time before removing clamps - check the product datasheet for full open and closed times, which vary with temperature. Once fully cured the glue line can be sanded flush or machined without issue, making it well suited to finishing-grade joinery. Store the bottle upright in frost-free conditions and replace the cap securely after each use to prevent skinning.
FAQ
What does D4 classification mean for wood adhesive?
D4 is the highest durability class under EN 204, meaning the adhesive has been tested to withstand prolonged exposure to water and high humidity. It is suitable for exterior joinery and applications where joints may be regularly wetted, such as garden furniture, gates, or external door frames.
Can Everbuild D4 adhesive be used on hardwoods as well as softwoods?
Yes. The adhesive bonds well to a wide range of timber species including oak, pine, and other common hardwoods and softwoods used in joinery and furniture production. Ensure surfaces are clean, dry, and free from dust or grease before applying.
How long does Everbuild D4 wood adhesive take to cure fully?
Initial set typically occurs within 30 to 60 minutes under clamp pressure at room temperature, but full cure strength develops over 24 hours. Cooler conditions slow the cure, so allow additional time in winter or on cold sites before machining or loading the joint.
Nottage Timber Merchants supply Everbuild D4 adhesive alongside a full range of timber and joinery materials. Browse our ironmongery and fixings collection for complementary products. We offer next-day delivery across South Wales and to the Bridgend area, or you can collect in store.
