The Story
Stixall Extreme Power grab adhesive and sealant in grey bonds to virtually any surface, wet or dry, in a single 290ml cartridge. This Sika Everbuild formula delivers high-strength adhesion and a flexible, weatherproof seal for interior and exterior use.
Specifications
| Property | Detail |
|---|---|
| Product Type | Grab adhesive and sealant |
| Brand | Sika Everbuild |
| Volume | 290ml cartridge |
| Colour | Grey |
| Application | Interior and exterior |
| Cure Characteristics | Flexible, waterproof, weatherproof |
| Compatible Tool | Standard skeleton gun |
What it's used for
- Bonding timber, skirting boards, architraves and mouldings to walls where mechanical fixings are impractical or unwanted.
- Fixing stone, ceramic tiles, metal trims and glass panels on both interior and exterior surfaces.
- Sealing and bonding joints on outdoor structures including fencing, decking boards and garden buildings, where weatherproofing is essential.
- General maintenance repairs to guttering, flashing and other wet or damp surfaces where conventional adhesives would fail.
Fitting and handling
Cut the nozzle to the required bead size and load the cartridge into a standard 290ml skeleton gun before applying a continuous bead to one surface. Press the two surfaces firmly together and hold briefly - the strong initial grab reduces the need for props or temporary supports in most situations, though heavy or vertical substrates may benefit from short-term support while curing.
Store the cartridge in a cool, dry place with the cap replaced after use; a partial cartridge stored correctly can remain usable for several weeks. Clean tools and uncured adhesive with white spirit before it sets, and allow adequate ventilation when working in confined spaces.
FAQ
Can Stixall Extreme Power be used on wet surfaces outdoors?
Yes. One of the key advantages of Stixall Extreme Power is its ability to bond to damp and wet surfaces, making it suitable for outdoor repairs and fixes where completely dry conditions are not always achievable on site.
Is this adhesive suitable for bonding timber to masonry?
Yes. Stixall Extreme Power bonds timber to masonry, brick, concrete and plaster, making it a practical choice for fitting skirting boards, door linings and timber battens directly onto block or brickwork without the need for additional mechanical fixings in many applications.
How long does Stixall Extreme Power take to cure fully?
Initial grab is fast, but full cure depends on temperature, humidity and joint thickness. Under typical UK site conditions - around 20 degrees Celsius and 50 per cent relative humidity - allow at least 24 hours before loading the joint, and longer in cold or damp weather.
For all the timber and joinery products this adhesive works alongside, browse our skirting boards and architraves collection at Nottage Timber Merchants. We supply trade and retail customers across South Wales, with next-day delivery available to the Bridgend area.
Description
Stixall Extreme Power grab adhesive and sealant in grey bonds to virtually any surface, wet or dry, in a single 290ml cartridge. This Sika Everbuild formula delivers high-strength adhesion and a flexible, weatherproof seal for interior and exterior use.
Specifications
| Property | Detail |
|---|---|
| Product Type | Grab adhesive and sealant |
| Brand | Sika Everbuild |
| Volume | 290ml cartridge |
| Colour | Grey |
| Application | Interior and exterior |
| Cure Characteristics | Flexible, waterproof, weatherproof |
| Compatible Tool | Standard skeleton gun |
What it's used for
- Bonding timber, skirting boards, architraves and mouldings to walls where mechanical fixings are impractical or unwanted.
- Fixing stone, ceramic tiles, metal trims and glass panels on both interior and exterior surfaces.
- Sealing and bonding joints on outdoor structures including fencing, decking boards and garden buildings, where weatherproofing is essential.
- General maintenance repairs to guttering, flashing and other wet or damp surfaces where conventional adhesives would fail.
Fitting and handling
Cut the nozzle to the required bead size and load the cartridge into a standard 290ml skeleton gun before applying a continuous bead to one surface. Press the two surfaces firmly together and hold briefly - the strong initial grab reduces the need for props or temporary supports in most situations, though heavy or vertical substrates may benefit from short-term support while curing.
Store the cartridge in a cool, dry place with the cap replaced after use; a partial cartridge stored correctly can remain usable for several weeks. Clean tools and uncured adhesive with white spirit before it sets, and allow adequate ventilation when working in confined spaces.
FAQ
Can Stixall Extreme Power be used on wet surfaces outdoors?
Yes. One of the key advantages of Stixall Extreme Power is its ability to bond to damp and wet surfaces, making it suitable for outdoor repairs and fixes where completely dry conditions are not always achievable on site.
Is this adhesive suitable for bonding timber to masonry?
Yes. Stixall Extreme Power bonds timber to masonry, brick, concrete and plaster, making it a practical choice for fitting skirting boards, door linings and timber battens directly onto block or brickwork without the need for additional mechanical fixings in many applications.
How long does Stixall Extreme Power take to cure fully?
Initial grab is fast, but full cure depends on temperature, humidity and joint thickness. Under typical UK site conditions - around 20 degrees Celsius and 50 per cent relative humidity - allow at least 24 hours before loading the joint, and longer in cold or damp weather.
For all the timber and joinery products this adhesive works alongside, browse our skirting boards and architraves collection at Nottage Timber Merchants. We supply trade and retail customers across South Wales, with next-day delivery available to the Bridgend area.
